HARDWARE

Sort by Position: Low to High
24 Per Page
RALLYE END FITTING (B23A KIT) (2xB23A / 2xSG10 / 2xS3) - TR-01324
CAD $35.00
The B23A Kit is a set of bolt in brackets that are usually sewn into 2" Lap belts. We call it a "Rallye End" kit because it usually comes on the street...
In stock
+ −
EYE-BOLT (7/16")
CAD $10.00
38MM
If you're looking for a secure means of completing your safety belt installation, then more than likely you will need an eye bolt. On this page, you are...
In stock
 
Select a Variation
EYE-BOLT (7/16") (22mm KIT) (4xSG23 / 4xS3 / 4xPINS)
CAD $40.00
For use in installation of your safety restraints, additional eyebolts and eyebolt reinforcements are sometimes necessary when accommodating safety belt...
In stock
+ −
REINFORCEMENT PLATE (7/16")
CAD $10.00
Reinforcing a harness mout point is essential when the location has not been engineered by the auto manufacturer. Any time you mount a harness to sheet...
In stock
+ −
WRAPPING 2-BAR-SLIDE (2" WEB)
CAD $10.00
This is a 2 Bar Slide designed for use with 2" webbing. It is found on almost all TAKATA harnesses because it has virtually no microslip under significant...
In stock
+ −
WRAPPING 2-BAR-SLIDE (3" WEB) *SPECIAL ORDER*
CAD $40.00
This is a 2 Bar Slide designed for use with 3" webbing. Its sole use is to thightly wrap a 3" shoulder belt around a bar or pin. It is lighter than a 3 Bar...
In stock
+ −
WRAPPING 3-BAR-SLIDE (2" WEB)
CAD $10.00
Standard 3 Bar Slide for 2" webbing. Uses the simple 3 Bar Slide wrapping technique. Most commonly used for HANS specific shoulder belts or anti-sub straps.
In stock
+ −
WRAPPING 3-BAR-SLIDE (3" WEB)
CAD $10.00
This 3 Bar Slide is designed to be used to wrap any 3" webbing to a harness bar, or to wrap any end fitting into a 3" piece of webbing. This is the bracket...
Out of stock
HARNESS BOLT
CAD $1.00
BOLT (7/16") (38mm) - TR-SG29
Fairly straight forward, these are offered in the lengths shown. 7/16" bolts fit many factory seat belt locations, including European and Asian automobiles.
In stock
 
Select a Variation
HARNESS BOLT (7/16") (25mm KIT) (4xSG10 / 4xS3)
CAD $5.00
In stock
+ −
BOLT-ON WASHER
CAD $1.00
HARNESS ACC - BOLT-ON WASHER (3/8" M10) - TR-S83
Whenever a bolt or eye-bolt is used to attach a harness to your vehicle, you should use these wavy washers. One on each side of the sheet metal. They will...
In stock
 
Select a Variation
BOLT-ON SLEEVE
CAD $10.00
HARNESS ACC - BOLT-ON SLEEVE (1/2"-->5/16" M8) (FOR B24) - TR-S88-B24
Takata Racing Insert Sleeve
In stock
 
Select a Variation
WAVY WASHER (7/16")
CAD $1.00
Whenever a bolt or eye-bolt is used to attach a harness to your vehicle, you should use these wavy washers. One on each side of the sheet metal. They will...
In stock
+ −
PINS (FOR B14 / B15)
CAD $1.00
Cotter Pin to secure Snap-On harnesses onto eyelet bolts.
In stock
+ −
SNAP-ON BRACKET (B15) (FOR 2" or 3" WEBBING) - TR-B15
CAD $15.00
TAKATA B15 Snap-in type harness end bracket. Clips into eyebolts and TAKATA bolt-in bracket B23. It can be sewn into 2” and 3” webbing, or wrapped with an...
Out of stock
SNAP-ON BRACKET (B15 KIT) (2xB15 / 2xSG23 / 4xS3) - TR-01312
CAD $50.00
Takata snap-on conversion kits make changing your harness from a bolt-in or wraparound quick and easy. Each kit includes two snap-on harness brackets, two...
Out of stock
BOLT ON BRACKET (B24) (10 DEG) (FOR 2" or 3" WEBBING) - TR-B24.15.13-NC
CAD $15.00
The B24 is the most economical bolt-in bracket offered. It is a heavy-duty Steel bracket that cannot be bent to aid installation. Dimensions are 5mm thick,...
In stock
+ −
BOLT-ON BRACKET (B23C) (90 DEG) (FOR 3" WEBBING ONLY) - TR-B23C
CAD $30.00
The B23C shares design with the B23B. Its main feature is that it is designed to be bent 90° in any direction while still retaining its strength. Dimensions...
Out of stock
BOLT-ON BRACKET (B23C KIT) (2xB23C / 2xSG10 / 2xS3) - TR-01323
CAD $60.00
The 01323 Kit is a bolt-in kit for 3" webbing for SFI applications only. It is designed in such a way that it can be bent with pliers to a specific angle...
Out of stock